UPS PIco HV3.0B hat on Archlinux

Need some help with your shiny new breakout board, or something not working right? Let us help you here!
Post Reply
Posts: 1
Joined: Wed Aug 01, 2018 10:31 pm

UPS PIco HV3.0B hat on Archlinux

Post by K5IMO » Wed Aug 01, 2018 10:53 pm

The installation material for the hat, plus an earlier post in this forum, talk about using the Rasperian version of Linux. Is the Archlinux version, which used exclusively by The Hamvoip support for AllStar, supported and, if so, are there differences in the install instructions? The main description of the product does not mention any OS requirements.

User avatar
Posts: 2856
Joined: Wed Jul 22, 2015 11:36 am

Re: UPS PIco HV3.0B hat on Archlinux

Post by Dave » Thu Aug 02, 2018 8:09 am

The required scripts needed for proper functionality of the UPS PIco have been written for the Rasbian OS. They may work on other linux based operating system, but they have not been tested, and we do not support the use of other OS's.

If the scripts don't work, you could look at porting the scripts.
Forum Administrator & Technical Support

Post Reply