Raspberry PI Camera and Camera Box

Need some help with your shiny new breakout board, or something not working right? Let us help you here!
Post Reply
andrewpi
n00b
Posts: 1
Joined: Fri Aug 31, 2018 7:44 pm

Raspberry PI Camera and Camera Box

Post by andrewpi » Fri Aug 31, 2018 7:59 pm

I have the Raspberry P:I Camera Board - Night Vision & Adjustable-Focus Lens (5MP)
and
ModMyPi - Pi Model B+ 2/3/3B+ Camera Box

But the camera doesn't seem to fit properly.
The 4 holes in the box, don't quite match the 4 corner holes on the camera board.
Also, even if I secured it with only two screws, the actual lens doesn't quite match up the square hole in the box and
then, even if it did, I can't see how the adjustable focus lens and the IR LED parts would attach.

Are these two items supposed to be compatible?

User avatar
Dave
ModMyPi
Posts: 2693
Joined: Wed Jul 22, 2015 11:36 am
Contact:

Re: Raspberry PI Camera and Camera Box

Post by Dave » Mon Sep 03, 2018 8:13 am

If you have this camera module - https://www.modmypi.com/raspberry-pi/ca ... ion-camera

Then you will need the case that is designed for the night vision camera modules:

Either the bundle - https://www.modmypi.com/raspberry-pi/ca ... e-b-plus23

or the case on its own - https://www.modmypi.com/raspberry-pi/ca ... x-b-plus23

The other camera boxes are designed to only work with the official Raspberry Pi Camera modules.
Forum Administrator & Technical Support

Post Reply