Allo Digione RCA Output

Need some help with your shiny new breakout board, or something not working right? Let us help you here!
Post Reply
mike247
n00b
Posts: 4
Joined: Fri Nov 30, 2018 2:54 pm

Allo Digione RCA Output

Post by mike247 » Fri Nov 30, 2018 2:57 pm

Hi,

Received Allo Digione today. Running it with Ropieee software on a Raspberry Pi 2B.

I get output from the BNC connector but not from the RCA connector.

It can't be the cable because the way that I am connecting to the BNC output is to use a BNC to RCA convertor. I have also tried a different cable.

Any suggestions?

Mike.

User avatar
Dave
ModMyPi
Posts: 2732
Joined: Wed Jul 22, 2015 11:36 am
Contact:

Re: Allo Digione RCA Output

Post by Dave » Fri Nov 30, 2018 3:21 pm

Could you try powering off the DigiOne and your receiver, switch the output, then power at all back on please.
Forum Administrator & Technical Support

mike247
n00b
Posts: 4
Joined: Fri Nov 30, 2018 2:54 pm

Re: Allo Digione RCA Output

Post by mike247 » Fri Nov 30, 2018 3:46 pm

Had already tried that but, just to be sure, did it again (powered everything off an back on).

Same as before - RCA cable connected to Digione using BNC/RCA adapter works fine. Same RCA cable plugged in to Digione using RCA output results in silence.

mike247
n00b
Posts: 4
Joined: Fri Nov 30, 2018 2:54 pm

Re: Allo Digione RCA Output

Post by mike247 » Fri Nov 30, 2018 4:49 pm

Have now tried 3 different options for OS:
(a) Ropieee
(b) DietPi
(c) DietPi + Allo GUI

Exactly the same with all 3.

Think that the Digione must have a faulty RCA output.

User avatar
Dave
ModMyPi
Posts: 2732
Joined: Wed Jul 22, 2015 11:36 am
Contact:

Re: Allo Digione RCA Output

Post by Dave » Mon Dec 03, 2018 9:05 am

mike247 wrote:
Fri Nov 30, 2018 4:49 pm
Have now tried 3 different options for OS:
(a) Ropieee
(b) DietPi
(c) DietPi + Allo GUI

Exactly the same with all 3.

Think that the Digione must have a faulty RCA output.
Ok, if you can let me know your order ID I will have sales contact you to arrange a replacement.
Forum Administrator & Technical Support

mike247
n00b
Posts: 4
Joined: Fri Nov 30, 2018 2:54 pm

Re: Allo Digione RCA Output

Post by mike247 » Mon Dec 03, 2018 10:17 am

Hi Dave,

Order ID is 247056

Thanks,

Mike.

Post Reply