HC-SR501 PIR Motion Sensor-Real Tutorial I find

What's that smell?! Ask your Pi!
Post Reply
Posts: 1
Joined: Sun Jun 09, 2019 10:06 pm

HC-SR501 PIR Motion Sensor-Real Tutorial I find

Post by Piteglio » Sun Jun 09, 2019 10:32 pm

I recently purchased the ModMyPi-PIR Night Vision Camera Box.
The editing was quite easy what stuck me is the HC-SR501 PIR Motion Sensor.
The tutorial linked from the assembly instructions is somewhat confusing, dated as of 2015, in reality it refers to a vague tutorial that is not for the product in question: ModMyPi - PIR Night Vision Camera Box - B+/2/3/3B+.
I Just remember the color of the cables to connect the GPIO: they are not at all the colors remembered in the tutorial.
A tutorial dealing exclusively the assembly between the raspberry pi 3 b+ or other pi and the HC-SR501 PIR Motion Sensor where do I find it?
Thanks in advance for any suggestions.

User avatar
Posts: 2965
Joined: Wed Jul 22, 2015 11:36 am

Re: HC-SR501 PIR Motion Sensor-Real Tutorial I find

Post by Dave » Mon Jun 10, 2019 8:41 am

Here is the tutorial for setting up the PIR motion sensor - https://www.modmypi.com/blog/raspberry- ... -detection

The cable colours may vary, but are labelled in the tutorial so you know which pin is what.
Forum Administrator & Technical Support

Post Reply